Product Center
Waterproof products
YH-RMG 402
Modified asphalt polyethylene tire root penetration resistant waterproofing membrane
Scope Of Application:
It can be used for waterproofing projects for planting roofs and underground building roofs.
Product Specifications:
|
Thickness(mm) |
Width(m) |
Length(m) |
type |
|
4.0mm |
1.0m |
10m |
Class R |
Execution Standards: GB18967-2009,GB/T 35468-2017
Product Overview
这里是标题一h1占位文字
Modified polyethylene as the tire base, double-sided coating polymer modified asphalt adhesive, while adding imported chemical root inhibitors in the adhesive, the surface is covered with isolation material made of waterproofing roll-roofing material.
Product Features
Construction Method
Pre-paving method
The coil is laid empty on the grass-roots level, and the material is lap-treated and tied directly to the reinforcement and poured concrete. In the concrete solidification, and coil 100% solid bonding, and the formation of a dense waterproof layer.
Pre-paving method
The coil is laid empty on the grass-roots level, and the material is lap-treated and tied directly to the reinforcement and poured concrete. In the concrete solidification, and coil 100% solid bonding, and the formation of a dense waterproof layer.
Technical Parameter
| serial number | project | index |
| 1 | Impermeable/MPa | 0.4MPa, impervious to water for 30min |
| 2 | Heat resistance/°C | No flow at 90°C, no foaming |
| 3 | Low temperature flexibility/°C | -20°C without cracks |
| 4 | Pulling force/(N/50mm) ≥ | 400 |
| 5 | Elongation at break/%≥ | 120 |
| 6 | The thickness of the asphalt coating layer on the lower surface of the coil is ≥ | 1.0 |
Application Cases