Product Center

Product Center


YH-SAP 209
Waterproof products

Waterproof products

YH-SAP 209

Wet laying self-adhesive waterproofing roll-roofing material

Scope Of Application:


Product Specifications:

Thickness(mm)

Width(m)

Length(m)

type

1.5、2.0、3.0、4.0

1.0m

7.5、10、15、20

Classes PY, H, E


Execution Standards: GB/T 35467-2017


Download

Product Overview

图片名称

这里是标题一h1占位文字

Is self-adhesive rubber asphalt as the base material, long fiber polyester tire (PY class) or polymer film (H class and E class) as the backbone of the main body, the use of anti-adhesive isolation film as a self-adhesive waterproofing roll-roofing material. Can be divided into polymer film-based waterproofing roll-roofing and polyester tire-based waterproofing roll-roofing (PY class); polymer film-based waterproofing roll-roofing is divided into high-strength class (H class) and high extension class (E class). Products are divided into single-sided adhesive (S), double-sided (D) according to the adhesive surface.

Product Features

图片名称
01
Light and thin material (Class H, Class E)
Easy to cut and paste, simple to operate, easy to construct
02
High strength (PY class)
Excellent puncture and chrome breaking resistance to resist unintentional damage at construction sites
03
Superb bonding power.
Full bonding with the base to achieve excellent waterproofing and water locking effect
04
Cold Construction
No open flame, energy saving and environmental protection
05
Coil can be dry laid method or wet laid
Various construction techniques to meet on-site construction needs

Construction Method

图片名称

Pre-paving method


The coil is laid empty on the grass-roots level, and the material is lap-treated and tied directly to the reinforcement and poured concrete. In the concrete solidification, and coil 100% solid bonding, and the formation of a dense waterproof layer.

图片名称

Pre-paving method


The coil is laid empty on the grass-roots level, and the material is lap-treated and tied directly to the reinforcement and poured concrete. In the concrete solidification, and coil 100% solid bonding, and the formation of a dense waterproof layer.

图片名称

Technical Parameter

图片名称
serial number project index
H And PY
1 Soluble matter content/(g/m2) ≥ 3.0mm - 2100
4.0mm 2900
2 Tensile properties Pulling force/(N/50mm) ≥ 300 200 500
Elongation/%≥ at maximum tensile force 50 180 30
Phenomenon when stretching There is no separation between the rubber layer and the polymer film or tire base
3 Tear strength/N ≥ 20 25 200
4 heat tolerance 70 °C, 2h no displacement, flow, dripping
5 Low temperature flexibility/°C -20
No cracks
6 Stickiness/min≥ 30
7 Oil permeability/number of sheets ≤ 2

Application Cases

图片名称
Guangzhou
Waterproofing
Guangzhou
Waterproofing
Guangzhou
Waterproofing