Product Center
Waterproof products
YH-CPM 105
Polyvinyl chloride waterproofing membrane
Scope Of Application:
It is suitable for waterproofing and anti-corrosion projects such as roofs, underground structures, pools, reservoirs, dams, landfills, subways, tunnels, pipe corridors, etc. of all kinds of industrial and civil buildings; It is especially suitable for waterproof projects with high environmental protection requirements and no open flame.
Product Specifications:
|
Thickness(mm) |
Width(m) |
Length(m) |
Model |
|
1.2、1.5、2.0 |
1.0、2.0 |
20 |
H、L、P、G、GL |
Execution Standards: GB 12952-2011
Product Overview
这里是标题一h1占位文字
This product is a high-strength polymer waterproofing membrane made of PVC resin with the addition of plasticizers, antioxidants, UV absorbers, fillers and other additives.
Product Features
Construction Method
Pre-paving method
The coil is laid empty on the grass-roots level, and the material is lap-treated and tied directly to the reinforcement and poured concrete. In the concrete solidification, and coil 100% solid bonding, and the formation of a dense waterproof layer.
Pre-paving method
The coil is laid empty on the grass-roots level, and the material is lap-treated and tied directly to the reinforcement and poured concrete. In the concrete solidification, and coil 100% solid bonding, and the formation of a dense waterproof layer.
Technical Parameter
| Serial number | project | index | |||||
| H | L | P | G | GL | |||
| 1 |
The thickness of the resin layer on the intermediate tire base is ≥ mm |
— | 0.40 | ||||
| 2 | Tensile properties |
Maximum pull/(N/cm) ≥ |
— | 120 | 250 | — | 120 |
|
Tensile strength/Mpa ≥ |
10.0 | — | — | 10.0 | — | ||
|
Elongation/% ≥ at maximum tensile force |
— | — | 15 | — | — | ||
|
Elongation at break/% ≥ |
200 | 150 | — | 200 | 100 | ||
| 3 |
Heat treatment size change rate/% ≤ |
2.0 | 1.0 | 0.5 | 0.1 | 0.1 | |
| 4 |
Low temperature bending |
-25°C, no cracks | |||||
Application Cases